Kitchen Technical Information
All you need to know about our kitchen furniture
Kitchen Furniture Technical Information
Why our furniture is the best quality on the U.K. market:
- Why our furniture is the best quality on the U.K. market:
- All of our cabinets are delivered fully assembled, with the doors and drawers fitted.
- Our carcasses are constructed using a pocket screwing method, which is stronger than the cam and dowel method.
- The material we use to construct our carcasses is 18mm thick MFC.
- The majority of our range comes with colour matched carcasses although we cannot offer gloss carcasses, only matt.
- Our units are built with adjustable shelves.
- Drawer boxes are 450mm deep on all units.
- All base units come with a 60mm service void at the back.
- All depths on the website exclude the door depth.
- All corner base units come with a 110mm service void in the corner.
- All wall units come with a 10mm service void at the back.
- Base units are 720mm high, adding a 150mm Plinth and 40mm Worktop, takes the total height to 910mm high.
- Wall units come in either 360mm high, 575mm high, 720mm high or 900mm high.
- Mid-Height units are 1295mm high, adding a 150mm Plinth and 40mm Worktop, takes the total height to 1485mm high.
- Larder units are either 1970mm or 2150mm high, adding a 150mm Plinth, takes the total height to either 2120mm or 2300mm high.
- All units come with full adjustment on the hinges and hinge plates, to allow flexibility if the alignment goes off square during fitting.
- Our furniture is moisture resistant; however we recommend that any excess water or damp is removed as soon as possible.
- All carcasses come in a matt finish. We can supply gloss end panels in all our gloss colours.
- We do not drill our doors for handles.
- All plinths and fillers are vinyl wrapped either MFC or MDF (depends on the range) even if the range is solid wood.
- All Shaker solid oak and walnut doors have a solid wood frame with a veneered centre panel.
- All doors, drawers and fascias are easily removable in order to access your services, or to keep them safe during installation.
- Our fascias are connected on spring or sliding clips and our hinges can be removed by depressing the button at the rear of the hinge arm to release.